Majestic Sign Studio replaced Race Tech's aging exterior signage with a coordinated three-sign package at the company's Corona headquarters. The project combined rapid site verification, production-focused design review, facade repair, acrylic signage, and installation. All fabrication for both building signs and a set of new address numbers were all fabricated in-house, everything made in ½” Acrylic letters w/ Black 3mm backplate for the large building sign.
Race Tech needed to replace aging exterior signage at its Corona, California headquarters without losing its recognizable identity. Majestic Sign Studio handled the site survey, design review, fabrication planning, removal, facade repair, painting, and installation of three new sign elements. The documented project ran from April 14 through June 11.
Founded in 1984, Race Tech is a performance engineering company serving motorcycle, ATV, UTV, and snowmobile riders with suspension products, engine services, technical support, and a worldwide service-center network. Its Corona headquarters therefore needed exterior identification that felt precise and consistent with an established performance brand.
| Requirement | Majestic Sign Studio's Work |
|---|---|
|
Existing-sign removal |
Aging logo assembly and website lettering removal |
|
Design and sizing |
Building measurements; approval of scale for production |
|
Fabrication |
Three coordinated exterior sign elements |
|
Facade restoration |
Former mounting areas patching and painting |
|
Installation |
Complete rhe signs position and installation on the Corona facility |
The older oval logo assembly showed visible deterioration and separation, while the existing racetech.com foam lettering appeared weathered against the facade. Removal would expose prior attachment points, making wall repair part of the signage work rather than a separate cosmetic task.
Scale was the second challenge. Accurate building dimensions were required to make the logo, website lettering, and supporting identification proportional to the architecture. After approval, the large brand sign also needed a production review so it could be fabricated efficiently without changing the intended appearance.
The project replaced a visibly deteriorated sign system with a more cohesive exterior identity. The new logo presents Race Tech’s established yellow, black, and blue branding in a cleaner format, while the blue acrylic racetech.com lettering provides clear website identification across the upper facade.
Majestic completed the documented scope by June 11. Race Tech then contacted the team to express satisfaction and left a Google review. The result is supported by completed scope, the observable before-and-after improvement, documented delivery, and the client’s direct response.
Majestic Sign Studio fabricated and installed three new exterior signs, including an updated Race Tech building logo and blue racetech.com acrylic lettering.
The project was completed at Race Tech’s facility in Corona, California.
The existing main building sign showed visible structural deterioration, while the older foam website lettering needed an updated, more durable replacement.
The work included a site survey, sign design review, fabrication, removal of the old signage, wall patching and painting, and professional installation of the new signs.
Majestic coordinated an on-site survey within two days of the initial outreach. Measurements taken at the property helped confirm the appropriate size and proportion for each sign.
One approved sign design required an adjustment before fabrication. Majestic incorporated a carefully planned seam so the sign could proceed through production while maintaining its intended appearance.
All three exterior signs were successfully installed, giving the Corona facility updated and consistent brand identification. Race Tech confirmed its satisfaction after completion and left a Google review.
Yes. Majestic Sign Studio manages exterior sign projects from site evaluation and design through fabrication, removal, surface preparation and installation for businesses in Corona and across Southern California.
Majestic Sign Studio helps businesses in Corona and across Southern California replace aging exterior signage with custom building signs designed for their brand, property and visibility needs. Our team manages the process from site survey and old-sign removal to fabrication, surface preparation and professional installation.
